Brass Parts
Showing 34 products
Precision Turned Components3
View category- Size
- OD 3 to 65 mm, length 2 to 120 mm
- Material
- Brass, SS, MS
Turned Bushes & Spacers
Plain, flanged and stepped bushes and spacers turned to drawing.
- Size
- M2 to M16, length 5 to 150 mm
- Material
- Brass, SS, MS
- Threads
- Metric, UNC / UNF, BSP
Threaded Studs & Pins
Double-end studs, dowel pins, grooved and headed pins.
- Size
- M5 to M48, 1/8" to 2"
- Material
- Brass, SS
- Threads
- Metric, BSP, NPT
Hex Turned Adaptors
Male, female and reducing adaptors turned from hex bar.
Electrical Parts6
View category- Size
- Conductor 1.5 to 95 sq mm, M3 to M10 screws
- Material
- Brass, Copper
- Threads
- Metric
Terminal Connectors
Single and multi-way brass terminal blocks and connectors.
- Size
- Ø 2 to 12 mm
- Material
- Brass, Copper
- Threads
- Metric
Modular Switch Contacts & Terminals
Contact rivets, terminal bodies and pins for modular wiring devices.
- Size
- Ø 1 to 8 mm
- Material
- Brass, Copper
Pin & Socket Contacts
Solid and split plug pins, socket contacts and crimp pins.
- Size
- 5 A, 6 A, 15 A and 16 A patterns
- Material
- Brass
- Threads
- Metric
Line, Neutral & Earth Plug Pins
Matched L, N and E pin sets for 2- and 3-pin plug tops.
- Size
- Ø 0.8 to 6 mm
- Material
- Brass, Copper
Automotive Contact Pins
Turned contact pins for vehicle connectors, sensors and switches.
- Size
- Up to 400 A ratings
- Material
- Brass
Single Pole Cam-Lok Connectors
Brass contacts with insulated boots for temporary high-current power.
Inserts & Anchors3
View category- Size
- M2 to M12
- Material
- Brass
- Threads
- Metric, UNC / UNF
Moulding Inserts
Knurled brass inserts for moulding into thermoplastics and thermosets.
- Size
- M2 to M8
- Material
- Brass
- Threads
- Metric, UNC / UNF
Heat-set & Press-fit Inserts
Inserts for post-moulding installation by heat, ultrasound or press.
- Size
- M5 to M12
- Material
- Brass
- Threads
- Metric
Brass Anchors
Expansion anchors and drop-in anchors for masonry and concrete.
Plumbing & Pipe Fittings7
View category- Size
- 8 to 54 mm pipe
- Material
- Brass
- Threads
- BSP, NPT
Compression Fittings
Couplers, elbows, tees and adaptors with olive and nut.
- Size
- 1/2" to 2"
- Material
- Brass
- Threads
- BSP, NPT
PPR / CPVC Inserts
Threaded brass inserts for moulding into PPR and CPVC fittings.
- Size
- 1/8" to 2"
- Material
- Brass
- Threads
- BSP, NPT
Threaded Pipe Fittings
Elbows, tees, sockets, nipples, plugs and bushes in brass.
- Size
- 1/4" to 2"
- Material
- Brass
- Threads
- BSP, NPT, Metric
Forged Brass Fittings
Hot-forged bodies machined to finish for valves and fittings.
- Size
- 2 to 12 ways, 1/2" to 1 1/4" body
- Material
- Brass
- Threads
- BSP, NPT
Brass Manifolds
Distribution manifolds for water, heating and gas circuits.
- Size
- Hose bore 6 to 32 mm
- Material
- Brass
- Threads
- BSP, NPT, Metric
Hose Nipple Fittings
Barbed hose tails and nipples with threaded or plain ends.
- Size
- 20 to 110 mm pipe
- Material
- Brass
- Threads
- BSP, NPT
Transition & Electrofusion Fittings
Brass inserts and terminals for joining PE pipe to metal systems.
Gas Fittings5
View category- Size
- To drawing
- Material
- Brass
- Threads
- BSP, Metric
LPG Regulator Components
Regulator bodies, nozzles, inlet adaptors and valve seats.
- Size
- 3/4" to 1 1/4"
- Material
- Brass
- Threads
- BSP
BS 746 Gas Meter & Regulator Parts
BS 746 meter unions, regulator connectors and nuts for domestic and commercial meters.
- Size
- To drawing
- Material
- Brass, SS
- Threads
- Metric, NPT
CNG Fittings
High-pressure adaptors, fillers and unions for CNG systems.
- Size
- 1/4" to 3/4" tube
- Material
- Brass
- Threads
- UNC / UNF
Flare Fittings
SAE 45° flare nuts, unions, elbows and tees for tube.
- Size
- 1/4" to 5/8" tube
- Material
- Brass
- Threads
- NPT
Air Brake Fittings
Fittings for air brake lines on trucks, buses and trailers.
Sanitary & Bath Fitting Components3
View category- Size
- To drawing
- Material
- Brass
- Threads
- Metric, BSP
Spindles & Cartridge Parts
Spindles, headwork and cartridge components for faucets and valves.
- Size
- M16 to M28, 1/2" to 3/4"
- Material
- Brass
- Threads
- Metric, BSP
Aerator Housings & Adaptors
Aerator housings, shower connectors and wall flanges.
- Size
- 1/2" to 1"
- Material
- Brass
- Threads
- BSP
Piping & Sanitary Fittings
Connectors, nipples, extensions and elbows for bathroom and kitchen piping.
Custom / Build-to-Print Components3
View category- Size
- Ø 2 to 65 mm from bar
- Material
- Brass, SS, MS
- Threads
- Metric, BSP, NPT, UNC / UNF
Build-to-Print Turned Parts
Any turned, drilled, threaded or knurled part made from your drawing.
- Size
- To drawing
- Material
- Brass, SS, MS
- Threads
- Metric, BSP, NPT, UNC / UNF
Prototype & Short-Run Components
Development lots for validation before production tooling is committed.
- Size
- To drawing
- Material
- SS, Brass, Aluminium
- Threads
- Metric, BSP
Investment Casting Parts
Lost-wax castings for detailed shapes, machined where it counts.
Brass Rods, Sheets & Wire4
View category- Size
- Round, hex and square sections to order
- Material
- Brass
Brass Solid Rods
Round, hex and square brass bar for machining.
- Size
- OD and bore to order
- Material
- Brass
Brass Hollow Rods
Hollow brass bar that saves drilling on bushes and fittings.
- Size
- Thickness and size to order
- Material
- Brass
Brass Sheets
Brass sheet and strip for pressing, stamping and fabrication.
- Size
- Diameter to order
- Material
- Brass
Brass Wire
Brass wire in coils for pins, springs and cold heading.
Can't find the exact part?
Send a drawing, a sample or a photo with the size and quantity. We make parts to your specification.